PDisp 19.4 Released Consolidation Settlement and COM Interface

PDisp 19.4 Released Consolidation Settlement and COM Interface

Share

Oasys have released PDisp 19.4, PDisp calculates displacement due to pressure, either loading or unloading. It is typically used for predicting settlement of ground due to surcharging or demolition, predicting settlement of flexible footing/rafts, and predicting settlement of tunnel due to loading or unloading of the soil. Previous versions applied the elastic analysis methods, Boussinesq and Mindlin.

19.4 introduces a new feature incorporating Consolidation Settlement, as well as the COM interface. Application Specialist, Zeena Farook, hosted a webinar on the latest release that can be watched here.

What is consolidation settlement and why does it occur? Consolidation settlement typically occurs in undrained soils such as clays due to the expulsion of water from voids. The rate of settlement can vary depending on the different soil permeability.

What is happening in the soil? Immediate settlement or elastic settlement occurs in the drained soils and partially in the undrained soils. After this, primary consolidation settlement occurs, where the reduction in soil volume is due to the reduction in pore water pressure. Secondary consolidation then begins where you experience constant pore water pressure but the volume changes due to the rearrangement of the soil particle.

What does PDisp do with its consolidation settlement? PDisp calculates instantaneous settlement in the drained and undrained soils, it will then calculate its primarily consolidation in the undrained soils. There are two options for the user;

mv Method (linear)

Cc Method (non-linear) - considers normally consolidated soils and overconsolidated soils

PDisp also calculates the secondary consolidation in the undrained soil.

Settlement

DispVsTime

COM Interface PDisp's new COM (Component Object Model) Interface utility allows for the creation of data objects. Data objects allow external programs to pass information and instructions to and from Oasys programs. COM objects can be used by many other programs, including Excel, MATLAB, and many others.

Why use COM Interface? COM is already an established utility in other Oasys programs including Frew and Alp. Eengineers have used it to quickly access specific outputs across multiple programs, such as running sensitivity analysis and iterate between analysis results and other programs.

To help you start using COM, we've added a new section in the User Manual that takes you through the programming interface within PDisp. Packaged within the 19.4 release are COM examples using VBA and C++ code.

If you are considering using COM with your programs our customer support team and internal developers can assist you with linking application together. Contact us to find out more.

LINK:	https://www.oasys-software.com/news/pdisp-19-4-released-consolidation-...
	See more stories from oasys

Most recent headlines