ATG Danmon Completes Broadcast Audio Relay for Iconic Bell Tower

ATG Danmon announces the completion of an audio system located in the clock tower adjacent to one of Europes longest established national legislatures.

The assignment forms the culmination of a five-year restoration project which included repairs to the clock and the masonry of the tower itself. It allows the chimes from the towers five bells to be captured in very high quality for live transmission as well as for use in news programmes and parliamentary broadcasts. The largest of the five, weighing nearly 14 tonnes, sounds the hour, supplemented by four smaller bells programmed to sound a distinctive sequence each quarter-hour.

ATG Danmon was commissioned to create the system on the strength of its long experience in video, audio and IP systems design and integration for the mainstream broadcast, legislative, corporate and university-level educational sectors.

A key challenge was the need to ensure faithful reproduction of the bells with minimal intrusion from road traffic. This required relatively close-proximity microphone placement within the belfry plus the ability to handle very loud transient sound without causing distortion in the microphones themselves or in the processing electronics which they feed.

ATG Danmon designed and integrated two complete audio chains configured as a fully resilient system. At the front end of each chain are a Sennheiser E904 dynamic cardioid microphone to capture the high level transients plus an Electro-Voice 635A omnidirectional dynamic microphones to capture the general acoustic of the belfry. All four microphones are fitted with windshields as the belfry is essentially an exterior space.

Audio output from each microphone pair is amplified to line level and encoded into an audio-over-IP data stream. All four streams are fed to a communications room where they can be converted back to analog for use with other programme content or optionally forwarded via an IP link to other broadcasters. The system integrated by ATG Danmon includes eight transceivers feeding a CTP DIO1600 AoIP interface capable of handling 16 analog line level sources and delivering 16 analog line level outputs. Each input and output allows +12 to -12 dB of gain adjustment. Operators can control parameters such as pre-amplification gain remotely via a secure IP link.

An unusual complication was the need to test the systems acoustic and electronic performance before the date when the bells were officially permitted to resume their public duty. This was overcome by performing tests at a church with a similar clock tower. The results were successful and have since been confirmed at the actual site.

The system secured a nationwide audience at the start of 2023 when the bells were broadcast as a core element of the countrys new year celebrations.

ATG Danmon, part of the Danmon Group, is an international systems integrator and a world-class supplier of broadcast systems planning, design, installation and commissioning services. Customers include some of the world's largest television and multimedia networks. ATG Danmon is also active in the educational and corporate sectors. The company has partnered with many clients in the construction of IT-based automated file workflow systems, high-definition studios, master control rooms and playout facilities, as well as the upgrade of existing SD systems to HD and UHD. With offices in Asia, Denmark, Germany, Norway, Portugal, Spain, Sweden and the United Kingdom, the Danmon Group (www.danmon.com) thinks globally and acts locally to support customers with its highly experienced sales and engineering teams.

www.atgdanmon.co.uk

LINK:	https://www.kitplus.com/news/ATG_Danmon_Completes_Broadcast_Audio_Rela...
	See more stories from tvbay

Most recent headlines