Mobile TV Group Rolls Out Second End-to-End Native-IP Mobile Unit With 46 FLEX

Mobile TV Group Rolls Out Second End-to-End Native-IP Mobile Unit With 46 FLEX The new mobile unit features a fully IP-connected B unit and is working the NFL on Fox By Jason Dachman, Chief Editor

Wednesday, October 9, 2019 - 11:17 am

Print This Story

Story Highlights

Mobile TV Group (MTVG) continues down the IP path with the launch of its latest mobile unit - 46 FLEX and 46 B Unit. The 1080p-ready truck, which launched last month working Fox Sports' NFL Sunday package, marks MTVG's second end-to-end native-IP mobile unit and is fully SMPTE ST 2110-integrated from soup to nuts.

Mobile TV Group's new 46 FLEX unit features a GV Kayenne K-Frame X IP switcher.

This mobile unit is definitely our most advanced system to date from a technology standpoint, says Mobile TV Group, CEO, Philip Garvin. It has the latest technology across the board and the fact that it's native end-to-end IP means that its capacity is enormous. It's also designed to do 1080p HDR shows and can do 1080p 8x-[high frame rate] for both the cameras and EVS. Because it's fully IP, there's no limitation in what it can do for a 1080p show; you have don't give up anything to do 1080p versus 720p - there is no infrastructure lost whatsoever.

IP Opens Up Whole New World of Possibilities for MTVG, Fox Sports

Like its predecessor 45 FLEX, MTVG's latest mobile unit is built around a Grass Valley Kayenne K-Frame X IP switcher (7M/E, 96 inputs/48 outputs), an Evertz 384-port EXE 2.0 IP router with up to 9,600 GBps, and a Evertz Magnum control system to manage the IP infrastructure.

The production area inside MTVG's 46 FLEX

Before IP, to achieve the 1080p capacity of 46 FLEX, you would need a baseband router of at least 3000 x 3000, says Mobile TV Group, COO, Nick Garvin. That just wouldn't be practical or even possible. So, we're very excited about what IP can offer.

Since both the 46 FLEX unit and the 46 B Unit are connected entirely via IP, every single source is available to either the A unit or B unit at any given time.

The 46 B Unit (shown here) is fully IP connected to the A unit, giving it access to all sources any any given moment.

MTVG and Fox have had a long and innovative relationship, says Mike Davies, SVP, technical and field operations for Fox Sports. We tapped Phil and his team to create a future-proof truck that could see us through the balance of this contract. It was no question that we needed the flexibility to do the shows of today and be ready to adapt to the shows of tomorrow. End-to-end IP was the easy answer to be sure we were ready for whatever comes.

Inside the Truck: Latest Tech Takes Center Stage

The truck is among the first to roll with Sony's new HDC-5500 multi-format live cameras, which are equipped with the world's first 2/3-inch 4K global shutter three CMOS sensor. 46 FLEX carries four HDC-550's aboard capable of up to 8x-high-frame-rate in 720p/1080p along with eight Sony HDC-3500 cameras and two Grass Valley LDK 8000 Elite cameras for the booth. In terms of glass, the truck is equipped with one Canon UJ111x8.3B long lens and seven XJ95x8.6B lenses (additional Canon 76x lenses long lenses can be added if using the B unit).

MTVG's 46 FLEX relies on a Calrec Artemis Beam audio console.

In the replay room, four 12-channel EVS XT VIA IP replay servers (with full editing capability and 16 channels of embedded audio) carry the load, while another four-channel EVS XS VIA server is on hand for Spotbox (two channels per show during dual feeds).

The audio room is built around a Calrec Artemis Beam 64-fader console (with 256 routable inputs via IP and 64 analog inputs/64 analog outputs) and relies on a 10,240 x 10,240 Evertz audio router connected via IP to the Calrec board. An RTS ADAM-M Matrix system handles the comms (64 ports of OMNEO, 32 channels of MADI, and 48 analog ports) and other key audio gear includes an ENCO Hotshot2 audio playout systems and a variety of Sennheiser microphones.

Inside MTVG 46 Flex's replay room

The truck also features Vizrt graphics and 11 frame sync/cross converters, including seven AJA FS-HDRs to enable HDR production when the client requires.

This truck is built for 1080p, and it can also do 1080p HDR with some monitoring changes. says Philip Garvin. Aside from the monitoring, it's literally like flipping a switch to make it HDR - all the licenses are there, and HDR doesn't require significant additional bandwidth. So yes, 46 FLEX is definitely ready for 1080p HDR.

Boarding the NMOS IS-04 and IS-05 Express

As AMWA's NMOS IS-04 discovery and registration specification and the IS-05 device connection management specification gain more traction in the industry, MTVG believes live IP production will continue to become more common. As a result, most of the IP gear on 46 FLEX is IS-04 and IS-05 compatible.

The shading area inside MTVG's 46 FLEX truck

That means you should be able to connect an EVS or camera to the router or the switcher and, thanks to IS-04 and IS-05, you will have immediate communication, says Philip Garvin. That didn't exist yet for 45 FLEX, but we have begun to take advantage of it in 46 FLEX and we're working closely with the manufacturers to perfect the IS-04 and IS-05 discovery and compatibility. We hope that when we launch our 47th mobile unit next year, these developments will make integrating a truck in IP much faster and easier.

MTVG completed 46 FLEX (shown here) over the summer and is already hard at work on its 47th truck.

Philip Garvin adds that MTVG is working closely with manufacturers to work out any IS-04 and IS-05 related bugs in the latest IP equipment, and he expects the company's next truck to be 100% IS-04 and IS-05 compliant. He also notes the IP integration piece of 46 FLEX took a fraction of the t

LINK:	https://www.sportsvideo.org/2019/10/09/mobile-tv-group-rolls-out-secon...
	See more stories from svg

Most recent headlines