Komplete Kontrol Integration in Studio One, Part 2/3: General-Purpose MIDI Control

In Part 1 ( A New Hope ) of the NI Kontroller trilogy, we covered how to integrate the DAW functions from Native Instruments' Komplete Kontrol keyboards with Studio One. Let's take this another step further.

In theory, Komplete Kontrol's MIDI control surface application is only for stand-alone use, and requires using both an external power supply and the keyboard's 5-pin DIN MIDI connectors for I/O. With a live rig, this makes sense; for use with a DAW, you have the NKS spec communicating over USB. But wouldn't it be great to be able to use the Komplete keyboard's control surface with non-NKS instruments, and even effects, in Studio One over USB? Well, you can.

GETTING STARTED

For Windows, install MIDI-OX. This utility is key to letting us re-direct the MIDI messages at the Komplete keyboard's external output to Studio One.

For Macs running Catalina, I currently don't know of any way to use the MIDI Patchbay utility. This is similar to MIDI-OX, but hasn't been updated since 2008, and system requirements stop at Mac OS X 10.14. You can try using it with pre-Catalina systems; if Apple's Gatekeeper blocks the installation, you'll need to allow it under Security & Privacy. Once you get it installed, it should work similarly to MIDI-OX if you choose Komplete Kontrol S-Series Port 1 for the MIDI input option (and consider that equivalent to Komplete Kontrol -1 in the following description), and choose Komplete Kontrol S-Series Port 2 for the MIDI output option (it should work similarly to Komplete Kontrol EXT-1, below). Mac users, please feel free to comment below about what does and does not work with the Mac.

Back to Windows

Turn on the Komplete keyboard.

After the keyboard boots, open MIDI-OX. Under MIDI-OX's Options > MIDI Devices, choose Komplete Kontrol 1 for MIDI Input and Komplete Kontrol EXT-1 for MIDI output (Fig. 1). Click OK to close the MIDI Devices screen.

Open Studio One, but leave MIDI-OX open while Studio One is open.

Figure 1: How to set up the MIDI-OX utility so that NI keyboards can control non-NKS instruments over USB.

Now we need to tell Studio One that MIDI-OX is a new keyboard, even though it isn't really. Choose Studio One > Options > External Devices, click Add, and choose New Keyboard (Fig. 2).

Figure 2: How to add MIDI-OX as a pseudo-keyboard.

For Receive From, choose Komplete Kontrol - 1. Studio One will warn you not to do this, but just ignore the warning. For Send To, choose Komplete Kontrol Ext - 1. You'll have another warning to ignore-but I promise you, no harm will come to Studio One.

Click OK, then click OK again to get out of the options screen. We'll cover when/how to use MIDI-OX later.

A WORD OF CAUTION

At the moment, the Komplete Kontrol application's template management is somewhat primitive. Any changes you make are saved when you close the MIDI controller application; there's no Save or Save as command, nor can you manage individual templates-they're all saved in a single .dat file.

However, if saving-by-closing doesn't work for you, and you can't seem to save new templates, there may be an esoteric Windows problem. This is particularly likely for those who upgraded to Windows 10 from an earlier version, because the folder holding the templates may be write-protected due to inheriting permissions. Here's the fix.

Open the C: ProgramData folder. (This is a hidden folder, so if you don't see it, type Windows key R, and then type Control Panel in the Open box. In the Control Panel, click on Appearance and Personalization, then choose File Explorer Options. Click on View, and then select Show Hidden Files, Folders, and Drives.)

In ProgramData, locate the Native Instruments folder, and right-click on it.

Click on the Security tab, then click Edit.

Choose Users, check all the Allow boxes, and click Apply. Also, do this for any other Group or User names that let you click the Allow boxes (Creator Owner may not no worries). After applying everything, click OK.

Okay, now that's out of the way. Hey!! Don't blame me! It's a Windows thing.

CREATING A STUDIO ONE-FRIENDLY TEMPLATE

You access the MIDI control surface when you push the Komplete keyboard's MIDI button, which also defaults to opening if the Komplete keyboard doesn't see an NKS instrument. The following procedure describes how to create the kind of template we want for Studio One's plug-ins.

Open the Komplete Kontrol application (Komplete Kontrol.exe) in stand-alone mode, not as a plug-in. This is the only mode that lets you do MIDI assignments. Then, click on the MIDI 5-pin DIN symbol in the upper right (Fig. 3).

Create a new template by clicking on the button under templates. Right-click on it to rename it.

The template will default to two pages of controls (16 knobs total), but of course, we want more! Click on the sign to the right of a page, and you can add up to two more pages.

Figure 3: The important items needed to create and customize a template are circled in white. From right to left: MIDI button that opens the MIDI assignment editor, sign for adding more pages, and sign for adding more templates (in this case, it's adding one for the Fat Channel).

Now comes the tedious part. Each knob and button needs to have a unique MIDI continuous controller (CC) number, so that each one can control a unique parameter. Page 1 defaults to CC14-CC21, and page 2 covers CC22-CC29. However, pages 3 and 4 just duplicate the assignments for page 1, and all the buttons default to CC112-CC119. So it's time to program some additional controls.

Click on one of the virtual knobs, and you'll see its number assignment in the MIDI field toward the lower middle. Change this number to the desired controller number. The label will still reflect the old numb

LINK:	https://blog.presonus.com/index.php/2020/01/24/komplete-kontrol-integr...
	See more stories from presonus

More from PreSonus