Sony Pixel Power calrec Sony

Don't Make This Mixing Mistake!

23/02/2024

By Craig Anderton

Do you think of mixes in absolute terms, or relative terms? Knowing the difference, and when to apply which approach, can make a huge difference in how easily mixes come together. This can also affect whether you're satisfied with your mixes in the future.

Mixing is about achieving the perfect balance of all of a song's tracks. When you start mixing, or if you mix in parallel with developing a song, your mixing moves are absolute moves because you haven't set up the relationship among all the tracks yet. For example, the guitar might be soft compared to the drums and bass, so you increase the guitar's level. At that point, you don't yet realize that when a piano becomes part of the mix, the guitar will mask it to some degree. So, now you'll need to readjust the guitar's level not only with respect to the drums and bass, but also in relation to the piano.

The further your mix develops, the more important the relative balance among all the levels becomes. Remember: Any change to any track has an influence on every other track. I can't emphasize that enough.

A Different Way to Finish a Mix

At some point, your mix will be almost there. That's when you notice little flaws. The drums are a bit overpowering. The bass needs to come up. The background singers don't have quite the right balance with the lead vocal. Two keyboard parts are supposed to be the same level, but one is slightly louder.

The absolute approach to addressing those issues would be to make those changes. The kick comes down a bit. The bass comes up. You balance out the background singers and the keyboards. Then you render another mix to see if the problems have been addressed. It's better, but now the bass is masking the low end of the keyboards. So, you bring up the keyboards a bit, but now they step on the background vocals

If you're not concentrating on how the tracks fit together in relative terms, then you'll constantly be chasing your tail while mixing. You'll keep making a series of absolute adjustments, and then wonder why relatively speaking, the mix doesn't gel.

The Relative Approach to Mixing

VCA Channels are the key to relative mix edits, because they can offset tracks easily compared to the rest of the mix. Take the example above of the drums being a bit overpowering, the bass too soft, etc. Rather than try to fix them all at the same time, here's what I do:

1. Choose the issue that seems most annoying. Let's suppose it's the drums being overpowering. I always start with fixing tracks that are too loud instead of too soft, because lowering the level of the loud track will make all the other tracks louder, relatively speaking.

2. Select the drum tracks (or drum bus) and choose Add VCA for Selected Channels.

3. Lower the VCA channel for the drums by (typically) -0.5 dB, but no more than -1.0 dB.

4. Not change any other track levels. Now it's time to render a new version of the mix, and live with it for a day.

Having softer drums will change the relative perspective of the entire mix. Maybe the bass wasn't that soft after all; maybe it was just masked a bit by the kick. Maybe the rhythm guitar is actually louder than it seemed, because its percussive strums were blending in with the drum hits-but the strums weren't noticeable until the drums were softer. And so on.

That -0.5 dB of difference will change how you hear the mix. -0.5 dB may not seem like much, but that's just one perspective. A different perspective is that it's making every other track +0.5 dB louder than the drums. So, you need to evaluate the mix with fresh ears, because that one change has altered the entire mix.

An advantage of using VCA channels is that when you add the VCA Channel, its initial setting is 0.0. It's easy to see how much you've offset the track level with the VCA, compared to (for example) changing a drum bus fader from -12.6 to -13.1. It's also easy to get back to where you started in case after listening to the track, you decide other tracks were the problem, and the drums need to return to where they were. Just reset the VCA to 0.0.

Let's suppose that after listening to the rendered version a few times at different times of the day, it seems like the drums fit in much better with the overall mix. Make the change permanent by de-assigning the tracks to the VCA Channel, and then removing the VCA Channel. (Or, leave it in and hide it if you think you might need more changes in the future.)

Next, let's suppose the bass still seems a little soft. I'll repeat the four steps listed above, but this time with the bass track, and raise it by +0.5 dB (fig. 1). Then it's time to render the track again, and live with it for a day.

Figure 1: A VCA channel has altered the drum mix by -0.5 dB. That VCA Channel is about to be removed, because -0.5 dB turned out to be the right amount. Meanwhile, a VCA Channel has been added to see if increasing the Bass level by +0.5 dB helps it fit in better with the mix.

It might seem that this one-track-at-a-time approach would take forever, especially because sometimes you may need to revise earlier changes. But it can save time, for two reasons:

Mixing sessions don't go on for hours. Because you listened to the rendered mix with fresh ears and know what you need to change, you make the change. After rendering the new mix, you're done for the day, aside from listening to it several times under various conditions. Your final mixes now become 5 to 10 minutes at a time spread over multiple days. An additional advantage is that you always hear the mix with fresh ears, instead of having listener fatigue set in during a long mixing session.

Often, after taking care of the most problematic tracks, other issues resolve themselves because they weren&#
LINK: https://blog.presonus.com/2024/02/23/dont-make-this-mixing-mistake/...
See more stories from presonus

More from PreSonus

19/04/2024

Impact XT's Secret Clip-Launching Talents

By Craig Anderton Impact XT can launch clips, which is great for songwriting (see the blog post Songwriting with Impact XT). But few people realize that Impact...

12/04/2024

Make Better Mixes with Selective EQ

By Craig Anderton Good mixes often depend on carving out a unique sonic space for each instrument, so you can hear them clearly. Sometimes carving out that spa...

05/04/2024

Multitimbral Magic with MIDI Guitar

By Craig Anderton MIDI guitars are a niche product, because the learning curve can be daunting for some guitar players. However, I'm surprised how many pro...

29/03/2024

Avoid Collaboration Concerns

By Craig Anderton As the universe of Studio One users grows, so do opportunities for collaboration. But your collaborator may not be using the same version of ...

22/03/2024

Create Rhythmic Alchemy with the BeatCoder

By Craig Anderton Over three years ago, I wrote a blog post on how to make a drumcoder. Its design was somewhat like a vocoder-drum audio served as a modulat...

15/03/2024

Make Stereo Downmixes More Immersive

By Craig Anderton One of Atmos's coolest features is scalability. No matter how complex your Atmos project may be, you can render it as Binaural, 5.1, 5.1....

13/03/2024

Studio One: A Brief Exploration with Great Good Fine Okay

Watch the Brooklyn Synthpop duo remix their song Blame in Studio One Less than 24 hours after meeting each other, producer Luke Moellman and vocalist Jon San...

10/03/2024

Stamp Out Boring Flanging!

By Craig Anderton The impetus behind this design was wanting to add envelope flanging to amp sims like Ampire. But there's a problem: most amp sim outputs ...

01/03/2024

Creating Room Ambiance with Virtual Mics

By Craig Anderton Supplementing close-miking techniques with room mics gives acoustic sounds a life-like sense of space. Typically, this technique involves pla...

27/02/2024

Notion Mobile 3.3 Now Available

Notion Mobile v3 took mobile music creation to the next level with support for iOS, Android, Windows, Fire OS and macOS. Now v3.3 adds many enhancements and fix...

26/02/2024

The Sweet Spot with Grammy-Nominated Producer 6ix

Logic's Grammy-nominated producer breaks down his Sweet Spot. Before he found success as an avant-garde hip hop producer, 6ix was just 30 units shy of a de...

25/02/2024

The Sweet Spot with Multi-Platinum Producer Warren Huart

The Grammy-nominated multi-Platinum producer breaks down his Sweet Spot. From the studio with chart-topping artists like Aerosmith and The Fray, to empowering ...

23/02/2024

Don't Make This Mixing Mistake!

By Craig Anderton Do you think of mixes in absolute terms, or relative terms? Knowing the difference, and when to apply which approach, can make a huge differe...

16/02/2024

Tuff Beats

By Craig Anderton Calling all beats/hip-hop/EDM/hard rock fans: This novel effects starts with drums modulating the Vocoder's white noise carrier, and take...

09/02/2024

Reinvent Your Stereo Panning

This tip is about working with stereo, NOT about Dolby Atmos or surround-but we're going to steal some of what Atmos does to reinvent stereo panning. Stud...

07/02/2024

Studio One: Mix in a New Dimension with Jeff Ellis

The GRAMMY-winning recording and mix engineer shows us how he uses Studio One to create an artful immersive mix. Jeff Ellis is a force to be reckoned with. The...

02/02/2024

Presence Electric 12-String (the Artist Version Remix)

Presence's sound library includes a fine acoustic 12-string guitar, but not an electric one. So, perhaps it's not surprising that one of the more popula...

26/01/2024

Faster, Simpler, and Better Comping

At first, this might not seem too exciting. But follow the directions below, and try comping using this method-I don't think you'll be disappointed. Thi...

19/01/2024

How to Quickly Slash Your Latency

You know the feeling: You're tracking or doing an overdub with a virtual instrument or amp sim, but you're frustrated by the excessive latency inherent ...

12/01/2024

How to Fix Phase Issues

Recording audio using more than one feed from the same source may create phase issues. For example, when miking a bass amp and taking a DI (dry) input, the DI&#...

05/01/2024

Bigger, Wider Sounds: Try Stereo Miking

If you haven't experimented yet with mid-side stereo miking, you'll be in for a treat when you do. Here's why: Record background singers with gorge...

29/12/2023

How to Prioritize Vocals with Mix Ducking

This complements the tip Better Ducking for Voiceovers and Podcasts and the tip Why I Don't Use Compression Anymore. It applies the concept of voiceover duc...

22/12/2023

Should You Use Highpass Filters when Mixing?

Engineers sometimes advocate using high-pass filters to clean up the low end and tighten the sound. Others believe that because of issues inherent in highpass...

20/12/2023

Studio One: A Brief Exploration with Josh Cumbee

The GRAMMY-nominated artist, producer, and songwriter shows us how he uses Studio One to cook a musical idea from scratch. Josh Cumbee is a triple threat: The ...

15/12/2023

Why I Don't Use Compressors Anymore

This wasn't a conscious decision, or something I planned. But when I looked through my last few songs while seeking candidates for a book's screenshots,...

08/12/2023

Phrasing-The Final Correction Frontier

First, a follow-up: In the October 13 tip about creating Track Presets for parallel processing, I mentioned that Track Presets can't include buses, which is...

01/12/2023

Vocoder Tweaks and Tricks

Vocoder's aren't normal effects. For example, Arturia's Vocoder V is an effect/instrument hybrid, because it's an audio effect that includes a...

24/11/2023

Release Your Music in Stereo and Immersive

For over a decade, stereo and mono vinyl records co-existed before the transition to stereo was complete. During that time, many records were released in both m...

17/11/2023

String Arrangements Made Simple

Strings can enhance almost any genre of music-and with a little more effort, you can do string arrangements that go beyond simply adding a string pad preset. So...

10/11/2023

The Metal Amp De-Harsher

Since Dynamic EQ was introduced in version 5, I've used it to replace and improve some techniques I used to do with static EQ. For example, I'm a fan of...

03/11/2023

Capture-and Keep-Your Creative Impulses

Gregor Beyerle recently posted a video called Producer vs. Engineer-What's the Difference?, which had quite a few comments. It seems most people feel that f...

27/10/2023

Better Drum Reverb with Dynamic EQ

Sending too many low frequencies through reverb gives a bloated, muddy sound. This is one reason why you'll rarely see a send from a bass track going into r...

20/10/2023

A Happy Accident for Drum Sounds

While trying to do something else with Melodyne, I stumbled on this way to add depth or tightness to drum sounds-quickly and easily. Here's the sound of an ...

13/10/2023

Create Track Presets for Parallel Processing

Parallel processing splits a signal into two or more parallel channels. Bi-amping is a common example of parallel processing: One channel processes low frequen...

06/10/2023

Easy Atmos: Grab Headphones, Mix, Have Fun!

Everyone talks about the importance of Dolby Atmos for post-production, but the implications go further than that. Atmos really does change how you create and ...

29/09/2023

You Can Do Immersive Audio. Right Now.

You don't need a massive surround system with speakers wired all over your studio to create immersive audio. Whether you want surround or Dolby Atmos mixes...

22/09/2023

Better Ducking for Voiceovers & Podcasts

By Craig Anderton Background music or environmental sounds are usually an essential part of commercials, movies, presentations, podcasts, and more. When doing ...

15/09/2023

Steal Your Intro-with Ripple Editing

The post Mixing la Studio One had a great response, so here's another tip that relates more to making better music than making better-sounding music. We&#...

08/09/2023

Quick EQ Fixes with Dynamic Tilt EQ

This FX Chain's inspiration is the Tilt filter circuit created by Tonelux designer Paul Wolff. First used in the Tonelux MP1A mic preamp, the Tilt filter h...

01/09/2023

Create Authentic, Customizable EDM Pumping with X-Trem

But first, some breaking news: Version 1.5 of The Huge Book of Studio One Tips and Tricks is now available from the PreSonus shop. Like previous versions, it...

25/08/2023

Superspeed Comping with Studio One 6.2

Studio One 6.2 reworked Layer and Take handling, and some of the new functionality is exceptionally useful. For example, suppose you want to record comp vocals ...

18/08/2023

The PhaseTone Warper

We haven't done a boutique digital effect for Studio One Professional in a while, so let's use a plugin in a totally wrong way-yet end up with somethi...

11/08/2023

Improve MIDI Drum Loop Flow

MIDI drum loops have a bad rap, because some musicians consider them metronomic and boring. But they don't have to be. Subtly leading or lagging the beat at...

04/08/2023

Mixing la Studio One

Ask 100 recording engineers about their approach to mixing, and you'll hear 100 different answers. Here's mine, and how this approach relates to Studio ...

28/07/2023

FL Studio Meets Studio One

FL Studio is a cool program. Yet when some users see me working with Studio One's features like comping tools, harmonic editing, the lyrics track, Mix FX, M...

21/07/2023

Make Bass Pop in Your Mix

Bass has a tough gig. Speakers have a hard time reproducing such low frequencies. Also, the ear is less sensitive to low (and high) frequencies compared to midr...

18/07/2023

Notion Mobile 3.2 Now Available

Notion Mobile v3 took mobile music creation to the next level with support for iOS, Android, Windows and macOS. Now v3.2 adds many enhancements and fixes, as we...

14/07/2023

Enhance Your Reverb's Image

First, an announcement: If you own the eBook How to Record and Mix Great Vocals in Studio One, you can download the 2.1 update for free from your PreSonus acc...

07/07/2023

Free! Three Primo Piano Presets

Let's transform your acoustic piano instrument sounds-with effects that showcase the power of Multiband Dynamics. Choose from two download links at the end ...

24/06/2023

Fix Boring Acoustic Drum Loops

Acoustic drum loops freeze-dry a drummer's playing-so, what you hear is what you get. What you get. What you get. What you get. What you get. What you get. ...