New intercom devices from RTS presented at IBC 06:

New intercom devices from RTS presented at IBC 2016: posted: 15/09/2016

Two RTS multiplexers integrate legacy keypanels into optical fiber networks

Two multiplexer models FMI-4 and FMI-8 from RTS integrate analog devices in optical fiber networks

Fast and easy wiring of analog keypanels over one fiber network

New devices support redundancy both on network and on node level providing highest flexibility, scalability and backward compatibility

Many broadcasters have studios in multiple geographical locations, with a large number of both analog and digital keypanels in use. With its two new multiplexer models, RTS now offers these users a powerful solution to integrate their analog keypanels into high-performance optical fiber networks. The FMI-4 and FMI-8 are fully compatible with RTS intercom matrices. User keypanels and interfaces from RTS can connect up to four or up to eight analog devices to a matrix over fiber network.

Multiplexing several analog cables into one single optical fiber not only reduces the amount of cabling, it also means less maintenance, allows for easy network configuration via software routing and provides full redundancy in a double fiber configuration. In addition, existing infrastructures can be leveraged by companies already using optical fiber networks.

The two multiplexers units from RTS:

FMI-4: multiplexer featuring four RTS compatible four-wire intercom ports with serial control, line level audio inputs and outputs, along with serial data links on RJ45 connectors for communication between intercom matrices and auxiliary devices.

FMI-8: multiplexer featuring eight RTS-compatible four-wire intercom ports with serial control, line level audio inputs and outputs along with serial data links on RJ45 connectors for communication between intercom matrices and auxiliary devices.

Simplified wiring and state-of-the-art signal transport

Instead of wiring each analog keypanels to its corresponding matrix, the keypanels are connected to the optical network and can then be routed to the matrix via software. But not only the wiring of analog keypanels itself is simplified; a fiber connection also allows users to build various network topologies like a ring, star or daisy chain. The data streams are transmitted unaltered and uncompressed, with a fixed latency of only 41.6 s per node - currently the lowest on the market. Various signals can be mixed and routed, such as analog audio, MADI, and Dante. Compared to copper-based networks, a fiber-based network architecture also offers greater bandwidth, lossless signal transmission over large distances and is unaffected by any electromagnetic field.

Redundancy

Once the multiplexers are interconnected in a dual fiber ring, the network is resilient to a single fiber failure and provides full redundancy. This prevents a single fiber fault interrupting the signal between the matrix and the keypanels. The multiplexer devices also feature built-in dual power supplies on board, allowing a permanent connection to a UPS (Uninterruptible Power Supply).

Scalability and compatibility

The complete system configuration is scalable and backwards compatible - it can be expanded at any time with the latest or legacy interfaces. Only a networked approach to media distribution allows an intercom system to be designed, configured and - if needed - redesigned with little additional effort and cost.

Synchronicity

Digital audio requires synchronization. The most professional way to transport digital audio is via the synchronous network. The data and the clock are transported together in a synchronous manner and all devices connected to the network work with the same clock. The new multiplexers come with a built-in, highly stable word clock generator. In case of a failure of the word clock master, the FMI-4 and FMI-8 multiplexers employ an automatic switching algorithm allowing every device to function as word clock master in a system.

The RTS multiplexer models feature low power consumption and silent operation. They can even be used in recording studios, OB vans or theater productions with very high requirements for room acoustics. The new devices will be sold as single units and pairs and will be available worldwide at the end of 2016.

LINK:	http://www.live-production.tv/news/products/new-intercom-devices-rts-p...
	See more stories from liveproduction

Most recent headlines