SSL System T Augmented at IBC 2018

Click here to receive emails with more news like this.



System T S300

IBC 2018, Booth 8.D83 - Solid State Logic is showing a range of new hardware solutions at IBC this year, including the new S300-32, a 32-fader compact broadcast console for SSL's System T broadcast audio production environment, and new additions to the SSL's Network I/O transport, routing, and control devices range.

SSL S300-32

The S300 compact broadcast console is a fixed layout control surface in 16+1 and now 32+1 fader versions that can be combined with any System T network objects (control, Network I/O, and processing engines), as part of a larger installation, or in stand-alone configurations for smaller broadcast facilities or OB.

System T S300 includes fully integrated, arbitrated audio and control resource sharing for SSL's Network I/O range across SSL's Tempest platform-based consoles: S500, S300, TCR and SSL Live (L500 Plus, L300 and L200).

Complete showfile compatibility between all System T consoles and controllers means production can easily move between control rooms within a facility, or an S300 can very easily be used as a backup surface to a larger S500. Where processing engines are of different sizes SSL's compatibility mode allows the pre-selection of channel, busses and effects resources that will be inactive on the smaller processing engine. Settings from the larger device are never lost and resources can be reassigned at any point during the show, even with audio passing.

Network I/O

SSL is also showing new additions to its range of System T and Network I/O transport, routing, and control devices. The TCM1 and Network I/O: GPIO 32 units enable straightforward LTC, MIDI, and GPIO connectivity to make the most of System Ts sophisticated Event Manager software.

Broadcast music production and post production environments in particular will benefit from the introduction of TCM1. The unit features standard LTC (XLR) and MIDI (DIN) connections, as well as two additional USB ports and two 25-way GPIO ports (12 GPI and 12 GPO) - all connected to System T via USB.

The SSL GPIO 32 provides a comprehensive solution to GPIO over Dante with 32 GPI and 32 GPO lines and redundant network connectivity via primary and secondary Ethernet connections on the front panel.

LINK:	http://www2.solidstatelogic.com/news/ssl-system-t-augmented-ibc-2018...
	See more stories from solidstate

Most recent headlines