Rohde & Schwarz and Pegatron validate FR3 phased array technology for dual stream MIMO at 13 and 15 GHz

Rohde & Schwarz and Pegatron validate FR3 phased array technology for dual stream MIMO at 13 and 15 GHz Rohde & Schwarz and Pegatron have collaborated to verify FR3 phased array performance in a MIMO test setup. Using the FSWX signal and spectrum analyzer with its multi-channel analysis capabilities and the R&S SMW200A vector signal generator from Rohde & Schwarz, the companies demonstrated dual polarized transmission at 13 GHz and 15 GHz with data throughput about twice that of a single stream setup.

Joint demonstration, combining Pegatron's FR3 phased array as DUT and the FSWX and R&S SMW200A from Rohde & Schwarz.

Rohde & Schwarz and Pegatron have presented a joint FR3 technology demonstration focused on phased array testing for future wireless systems. The setup at 6G Summit in Taipei, Taiwan combined Pegatron's dual polarized FR3 phased array with the FSWX signal and spectrum analyzer and the R&S SMW200A vector signal generator. The measurement focused on MIMO transmission at 13 GHz and 15 GHz, frequency ranges relevant to 6G research for RAN infrastructure as well as for satellite applications.

The demonstration showed how dual polarization can increase data throughput in FR3 systems. In the exhibition setup, the companies reached a projected data transmission rate of 1.7 Gbps using 100 MHz bandwidth, 4096 QAM, and dual stream transmission. This corresponds to about twice the throughput of a comparable single stream configuration. The result gives an example of how FR3 can support high bandwidth, high order modulation, and multi-stream wireless links.

Pegatron also tested its FR3 phased array antenna in a standard office environment. Under the 5G NR protocol, the system reached a peak expected data rate of 1.4 Gbps across an indoor distance of 40 meters. The setup used 100 MHz bandwidth, 1024 QAM, and dual stream transmission. This test adds a more practical scenario to the exhibition result and helps compare laboratory style verification with indoor deployment conditions.

For the verification work, Pegatron leveraged the multi-channel analysis capabilities of the FSWX signal and spectrum analyzer together with the R&S SMW200A vector signal generator. Earlier measurements relied on a conventional spectrum analyzer, where horizontal and vertical signal controls had to be adjusted separately. The newer setup based on the game-changing architecture of the FSWX made it possible to analyze multiple channels in parallel and to obtain results that are closer to actual system behavior.

The collaboration reflects ongoing work around FR3 for 6G, radio access infrastructure, satellite links, and other high data rate wireless applications. Alexander Pabst, Vice President Market Segment Wireless Communications at Rohde & Schwarz, said: FR3 is expected to provide the highly demanded additional spectrum for 6G. Wider bandwidth, higher order modulation and massive MIMO demand evolved test and measurement equipment. Rohde & Schwarz test solutions play a central role in the verification of demanding wireless and phased array performance criteria. With its new architecture, the FSWX combines multiple input ports, cross correlation capabilities, advanced filter banks and broadband ADCs to address complex signal analysis tasks at unprecedented speed and accuracy.

William Wu, Director of the Communication Technology Center at Pegatron, said: As 6G enters the critical phases of standardization and technology R&D, the FR3 frequency band has become a pivotal battleground for future wireless innovation. Pegatron continues to invest in next-generation wireless technology. Having successfully developed 13 GHz (FCC) / 15 GHz (ITU) phased array antenna technology, which integrates array antennas, BFICs, and RF frontends with beamforming, H/V (Horizontal/Vertical) dual-linear polarization, and multi-channel designs, we have built robust beam control and high-speed transmission capabilities for the FR3 band. Moving forward, we are expanding our FR3 portfolio by actively developing 7 GHz / 8 GHz array antenna modules for Massive MIMO.

For further information on 6G FR3 testing solutions from Rohde & Schwarz, visit: https://www.rohde-schwarz.com/solutions/wireless-communications-testing/wireless-standards/6g/6g-fr3-testing/6g-fr3-testing_258589.html

LINK:	https://www.rohde-schwarz.com/uk/about-us/news-press/all-news/rohde-sc...
	See more stories from rohde

Most recent headlines