Calrec has done the thinking, so you can do it on Impulse

Calrec has done the thinking, so you can do it on Impulse posted: 03/09/2018

At IBC2018 (stand 8.C61), Calrec is previewing its new Impulse core, the next generation audio processing platform. The Impulse core is a very powerful audio processing and routing engine with AES67 and SMPTE 2110 connectivity. The Impulse core is compatible with existing Apollo and Artemis control surfaces, providing a simple upgrade path for existing Calrec customers.

Impulse is a very robust and scalable DSP platform that illustrates a clear direction for Calrec's future development, giving our customers a fully defined upgrade path as they transfer to IP infrastructures, said Dave Letson, Calrec's VP of Sales. In addition, future scalable expansion will allow up to three DSP mix engines and control systems to run independently on a single core at the same time, providing the ability to use multiple large-format mixers simultaneously in an extremely cost-effective and compact footprint.

Impulse provides 3D immersive path widths and panning for NGA (next generation audio) applications, 5.1, 5.1.2, 5.1.4, 7.1, 7.1.2 and 7.1.4 input channels, busses, monitoring and metering are available. Height and 3D pan controls are provided, and paths of all widths can co-exist within a mix and be routed to/from each other with flexible panning and downmixing built in.

The signal processing capacity of the Impulse core is unlike anything else available and is the most powerful DSP engine on the planet, continued Letson. It utilises the next generation of Calrec's award-winning Bluefin DSP technology - Blu3fin - with five different user-upgradable DSP packs, all of which will be available from launch and range from 256 input channels in the XS Pack to 1,122ch in the XL Pack. In fact, Impulse provides more than 400 independent busses; 192 x mains/groups, 48 x auxes, 96 x tracks, with 3 x AFL and 3 x PFL immersive busses.

He added, With control connectivity via IP, surfaces can be physically remote and connected over standard networks using COTS hardware. Above all else, it gives our customers a very powerful suite of broadcast features, which will take them into the next era of broadcast workflows.

Impulse has an integral AoIP router, which fully supports NMOS discovery and connection management, as well as mDNS/Ravenna discovery. Up to four router cards can be fitted, each with a 4096 x 4096 audio routing matrix, and can operate at 1 or 10Gbps. Two 5U Impulse cores can be combined to provide full redundancy and can be physically remote from each other for disaster recovery.

Letson said, This technology enables all Calrec customers to make the transition to NGA and IP infrastructures, and provides the flexibility to do so in a timescale that works for them and without an overhaul of production equipment. Impulse gives existing customers the opportunity to upgrade to new network technologies when it is right for them, and provides a clear, simple and cost-effective upgrade path.

About Calrec Audio Ltd.

Calrec Audio is exclusively dedicated to excellence in audio mixing for on-air and live production. A broadcast specialist for more than 50 years, Calrec has developed a range of digital consoles relied on by the world's most successful broadcasters. For putting sound in the picture, broadcasters put their trust in Calrec.

LINK:	https://www.live-production.tv/news/products/calrec-has-done-thinking-...
	See more stories from liveproduction

Most recent headlines