Does an Active Patch GNSS Antenna Need a Ground Plane?

A GPS antenna ground plane provides the conductive RF reference a ceramic GPS/GNSS patch needs, but that does not always mean the product PCB must provide it. The important distinction is how the patch is integrated. A passive ceramic patch element can form part of the host PCB RF design, while a complete active embedded antenna incorporates much more of the RF system into the supplied antenna assembly.

GPS/GNSS INTEGRATION 2 MIN READ

A GPS antenna ground plane provides the conductive RF reference a ceramic GPS/GNSS patch needs,

but that does not always mean the product PCB must provide it.

The important distinction is how the patch is integrated. A passive ceramic patch element can form part of the host PCB RF design, while a complete active embedded antenna incorporates much more of the RF system into the supplied antenna assembly.

Quick answer Not always.

The host PCB does not necessarily have to provide the antenna ground plane.

Active antenna automatically ground-plane independent

Two ways to integrate a ceramic GPS/GNSS patch The ground-plane requirement depends partly on whether the ceramic patch is being designed into the product PCB or supplied as part of a complete RF assembly.

PCB-LEVEL INTEGRATION

Passive ceramic patch element The patch becomes part of the products RF design. The host PCB ground structure, RF feed and matching arrangement can all affect antenna performance.

Ceramic

patch

Host PCB

ground

RF feed

matching

LNA /

receiver

More of the antenna design is carried by the host PCB.

PRE-INTEGRATED RF ASSEMBLY

Complete active embedded antenna The ceramic patch is supplied with its RF PCB, LNA and associated circuitry, shielding, coaxial cable and connector.

Patch RF PCB

LNA shield

Coaxial

cable

GNSS

receiver

More of the antenna RF system is already integrated.

S

Sirettas embedded ceramic GPS/GNSS antennas use the complete active assembly approach. This reduces the amount of antenna RF design required on the host PCB and allows the antenna to be positioned independently of the receiver using its coaxial cable.

Inside a complete active embedded antenna A complete active GPS/GNSS antenna contains considerably more than the ceramic patch visible from the outside.

The ceramic patch, RF feed, LNA circuitry, shielding, cable and connector are designed together as a complete antenna assembly. The receiver therefore connects to an already-integrated RF system rather than requiring each of these stages to be designed into the main product PCB.

Reduced PCB-level RF integration The designer can concentrate more on antenna position, enclosure layout and receiver compatibility rather than developing the ceramic patch feed and active RF stage from scratch.

Antenna position is less tied to the receiver The coaxial cable allows the antenna to be placed in a more suitable RF position while the GNSS receiver remains on the main PCB.

TYPICAL ACTIVE EMBEDDED ANTENNA CONSTRUCTION Step through the assembly to see how the individual components form the complete antenna system.



1 / 7

Does the host PCB need to provide the ground plane? Not necessarily.

With a passive ceramic patch designed directly into the host PCB, the PCB ground structure can be fundamental to the antennas operation.

A complete active embedded antenna can reduce that dependency because more of the antennas RF structure is incorporated into the supplied assembly. Some designs are characterised in free space, while others are characterised with a defined conductive reference plane.

For a design characterised with a defined external ground plane, preserve the intended conductive environment as closely as practical. For an assembly characterised in free space, do not add a host ground plane solely because the antenna uses a ceramic patch.

Engineering rule ACTIVE GROUND-PLANE INDEPENDENT

The ground-plane requirement belongs to the individual antenna design, not simply to whether the antenna contains an LNA.

What does the host PCB still affect? Even when it is not providing the antenna ground plane, the host PCB and surrounding hardware remain part of the RF environment.

01 PCB copper Nearby conductive areas can alter antenna impedance and resonant behaviour.

02 Metalwork Shield cans, brackets and chassis parts can disturb the radiation pattern.

03 Batteries & displays Large conductive structures close to the antenna can change its surrounding RF environment.

04 Metal above the patch Conductive material above the radiating face can obstruct incoming GNSS signals as well as affect antenna behaviour.

Ground-plane independent does not mean placement independent.

Practical GPS antenna ground plane integration rules Do

Determine whether the selected antenna is intended for free-space or defined-ground-plane integration.

Preserve the intended conductive environment around a ground-plane-dependent design.

Keep the ceramic radiating face directed towards the sky in normal use.

Use the coaxial cable to position a complete active antenna where reception is best.

Keep large conductive objects away from the radiating face.

Dont

Assume every active GPS antenna is ground-plane independent.

Apply one generic PCB ground-plane size to every ceramic patch antenna.

Assume that adding more host-PCB copper always improves performance.

Place metal directly above the ceramic patch.

Treat a ground-plane-independent antenna as immune to its surrounding enclosure.

Related engineering topics Continue with the integration question most relevant to your design.

SELECTION GUIDE How to choose a GPS antenna for an embedded device Compare antenna size, GNSS bands, gain, connector type and enclosure constraints.

Read article ANTENNA ARCHITECTURE Active vs

LINK:	https://www.siretta.com/2026/09/gps-antenna-ground-plane/...
	See more stories from sequoia

Most recent headlines