Christian Radio Broadcasters SES- Frequency Retune April 06

Beginning April 1 through April 30, 2016, the following procedures should be used to retune CRC radios from the current frequency to the new frequency.

Current CRC Frequency: 04043.42

New CRC Frequency: 03832.45

For assistance with receiver issues, please contact your parent network.

Unity4000

From the Main Screen showing the Unity-4000/SN/EbN0, press the right arrow to go to the Hardware Setup screen. Press Select .

At the Current Settings screen press Select .

Current RFIN FREQ should be 04043.42 and current DATA RATE should be 06.580. Press Select to edit.

The first set of digits should be flashing on the RFIN FREQ. Use the down arrow to change the first three digits to 038, then press the right arrow once and change the second two digits to 32, then press the right arrow once and change the last two digits to 45. Press Enter to save. The Frequency should now read 03832.45.

Right arrow three times to get to the Cancel/Save screen. Press Enter to save settings.

Samsung (Monitor and remote required)

Press the Menu button on the remote. A Menu will appear with the following selections; Installation/Channel Organizing/Parental Lock/System Setup. Highlight Installation Press Ok on the remote. A pop-up window will appear asking for a PIN Code. The default PIN is 0000. Enter the correct code. A sub-Menu will appear. Arrow down to Manual Scanning line. Press OK on the remote. This will display a Menu with the current satellite. The current satellite should be AMC3C.

Arrow down to the Frequency The Current Setting should be 4043 MHz.

To enter the new Frequency of 3832 MHz, simply enter 3832 on the keypad of the remote. On the Samsung remote press the Text button. This will save the settings you just changed. Press Exit until you reach Main screen. Audio should return shortly.

Unity550 (Connected to a monitor with composite input is recommended)

Press Enter

Main Menu display, using the down arrow move down to the Carrier Settings line. Press Enter

Carrier Settings screen displays. Using the down arrow move to the Current Channel line, Press Enter

Current Channel displays, Arrow down to the Frequency line.

The current Frequency is 4043.42 MHz.

Press Enter

Using the Up or Down arrow change the value to 3832.45 MHz.

Press Enter

Arrow down to the Commit Changes line Press Enter

Receiver will fall back to default home screen on its own.

Unity 4600

The main screen shows Prg ####, 4043.42MHz, and EbNo. From the main screen, use the right arrow to navigate to the Downlink Frequency Screen.

The current downlink frequency is 4043.42 MHz.

Press ENT and use the up and/or down arrow keys to change the frequency to 3832.450 MHz.

Press ENT when the new frequency has been input.

Press ESC to return to the main screen.

Unity 500

Connect the receiver to a monitor using a composite input.

From the Main Menu (access the Main Menu by pressing either the SELECT or ENTER buttons on the front panel), use the SELECT button to highlight the Carrier Select item. Press ENTER.

Press SELECT to place cursor on the Carrier (MHz) field. Press ENTER.

The current frequency is 4043.42 MHz. Use ENTER to change the digit (0-9), and use SELECT to move to the next digit to be changed.

The new frequency is 3832.450 MHz.

After completing the changes, press SELECT to select Activate Selection and Exit.

Press ENTER to save the new settings and to activate the changes.

Use SELECT to move to Exit to exit the Main Menu. Press ENTER.

Star Cruiser

Connect the Star Cruiser to a monitor using a composite input. A remote is required.

Press Menu on the remote.

From the Main Menu, use the arrow keys to navigate down to Installation . Press Ok on the remote.

On the Installation screen, navigate to TP Configuration . Press Ok on the remote.

The current satellite settings will be displayed. Scroll down the list until LNB is highlighted. Press Ok on the remote.

Arrow down L.O. Freq 4043 is highlighted. Press Ok on the remote.

A cursor will appear under the current frequency. Use the arrow keys to enter the new frequency of 3832.450 MHz. Press Ok on the remote.

Press the Exit button on the remote.

LINK:	http://microspace.com/2016/crc-ses-2-frequency-retune-april-2016...
	See more stories from microspace

More from Microspace Communications