The Vocal Repair Kit

Although it's always better to fix issues at the source, here's a tip to help repair recorded vocals during the mixing phase. The technique (which is featured in the new book How to Record and Mix Great Vocals in Studio One - 2nd Edition) combines multiband dynamics processing with equalization to both de-ess and reduce plosives. Although the screen shot shows the Multiband Dynamics processor in Studio One 5, this technique will work with previous Studio One versions if you duplicate the settings.

In the screen shot, the Multiband Dynamics' Low band settings are outlined in red, and the High band settings are outlined in blue. (Note this is not the actual interface; the high band panel is pasted into the image from a different screen shot so you can see both the Low and High band settings simultaneously.)

The High band acts as a de-esser, because it applies compression to only the high frequencies. This helps tame sibilance. The Low band compresses only the low frequencies, which reduces pops. However, this preset also takes advantage of the way Multiband Dynamics combines equalization with dynamics control. Turning down the Low stage Gain all the way further reduces the low frequencies, where pops like to hang out and cause trouble.

For the High band, vary compression to taste. The compression settings are less critical for the Low band if you turn the Gain down all the way, but in either case, you'll need to tweak the settings for your particular vocal track.

And that's all there is to it. When a loud pop or sibilant sound hits the Multiband Dynamics, it's compressed to be less annoying, while leaving the rest of the vocal intact. Vocal repaired!

LINK:	https://blog.presonus.com/index.php/2020/10/02/vocal-repair-kit/...
	See more stories from presonus

Most recent headlines