Sweet Multiband Chorus

Full disclosure: I'm not a big fan of chorusing. In general, I think it's best relegated to wherever snares with gated reverbs, orchestral hits, DX7 bass presets, Fairlight pan pipes, and other 80s artifacts go to reminisce about the good old days.

But sometimes it's great to be wrong, and multiband chorusing has changed my mind. This FX Chain (which works in Studio One Version 4 as well as Version 5) takes advantage of the Splitter, three Chorus plug-ins, Binaural panning, and a bit of limiting to produce a chorus effect that covers the range from subtle and shimmering, to rich and creamy.

There's a downloadable .multipreset file, so feel free to download it, click on this window's close button, bring the FX Chain into Studio One, and start playing. (Just remember to set the channel mode for guitar tracks to stereo, even with a mono guitar track.) However, it's best to read the following on what the controls do, so you can take full advantage of the Multiband Chorus's talents.

Anatomy of a Multiband Chorus The Splitter creates three splits based on frequency, which in this case, are optimized for guitar with humbucking pickups. These frequencies work fine with other instruments, but tweak as needed. The first band covers up to 700 Hz, the second from 700 Hz to 1.36 kHz, and the third band, from 1.36 kHz on up (Fig. 1).

Figure 1. FX Chain block diagram and Macro Controls panel for the Multiband Chorus.

Each split goes to a Chorus. The mixed output from the three splits goes to a Binaural Pan to enhance the stereo imaging, and a Limiter to make the signal pop a little more.

Regarding the control panel, the Delay, Depth, LFO Width, and 1/2 Voices controls affect all three Choruses. Each Chorus also has its own on/off switch (C1, C2, and C3), Chorus/Double button (turning on the button enables the Double mode), and LFO Speed control. You'll also find on/off buttons for the Binaural Pan and Limiter, as well as a Width control for the Binaural Pan. Fig. 2 shows the initial Chorus settings when you call up the FX Chain.

Figure 2. Initial FX Chain Chorus settings.

The Multiband Advantage Because chorusing occurs in different frequency bands, the sound is more even and has a lusher sound than conventional chorusing. Furthermore, setting asynchronous LFO Speeds for the three bands can give a more randomized effect (at least until there's an option for smoothed, randomized waveform shapes in Studio One).

A major multiband advantage comes into play when you set one of the bands to Doubler mode instead of Chorus. You may need to readjust the Delay and Width controls, but using Doubler mode in the mid- or high-frequency band, and chorusing for the other bands, gives a unique sound you won't find anywhere else. Give it a try, and you'll hear why it's worth resurrecting the chorus effect-but with a multiband twist.

Download the .multipreset here.

LINK:	https://blog.presonus.com/index.php/2020/09/11/sweet-multiband-chorus/...
	See more stories from presonus

Most recent headlines