Sony Pixel Power calrec Sony

Meet Your Maker: Joe Gulaiczuk

16/09/2020

Welcome to the sixth instalment of Meet Your Maker Q&A! Meet Your Maker is a series of behind-the-scenes videos and blogs that illustrate the wide range of in-house skillsets used to design and manufacture our market-leading broadcast technology whilst exploring the amazing people behind Calrec.

This week we had the pleasure of speaking with Calrec's experienced Project Engineer, Joe Gulaiczuk, who has worked at Calrec for over two decades about Calrec's robust project engineering system and acceptance area, the importance of consistency, and how testing has changed for the better with more remote capabilities.

1. What is your role?

I am one of several project engineers working in the manufacturing section of Calrec. We provide the link between the sales team and production/manufacturing. All broadcast installations are detailed and unique, and we provide a point of contact for the customer to discuss with their individual requirements. This allows us to ensure that nothing is missed and the customer receives the optimum working solution to meet their needs. We also provide a point of contact for any questions/requests that may arise during the manufacture and testing of the systems.

2. What defines project engineering for Calrec?

It is a structured system that ensures that the customer receives exactly what they require. This means that each customer receives the same high level of dedication and attention to detail as the next. Any issues to do with compatibility, software versions, compliance are taken into account during the process.

3. How does the project engineering system work?

Once an order is placed, a Project Engineer is assigned to that order. All information relating to that project is collated and analysed and everything is checked against our current system builds to look for any anomalies or opportunities for improvement.

At this point, any corrections can be advised and alternatives can be suggested. We then work with the production planner to schedule the work on the manufacturing calendar within the required timescale.

Project information is then summarised and presented in a consistent, understandable format to the rest of the company. During the life of the project, we also provide a single point of contact. This is vital as there are many different specialists within the company whose advice may be required along the way. We are best placed to be able to work out who to talk to and get that information, rather than the customer being passed around until they find the right person!

4. What documentation is created?

Internally, we provide build information for the manufacturing team in order for it to be able to be assembled into a customer's bespoke console and audio system. That same information is also passed on to the customer for reference during the project and for the life of the audio system going forward.

That allows for easy reference in case of additional equipment being added later or any fault-finding that may be required. This includes:

Layout diagrams showing the surface configuration of the mixing consoles.

Network drawings showing the interconnection of the system components.

Wiring drawings detailing the connectivity of the panels within a console and any external connections.

A set of the customer's audio and networking settings, including running levels and identification numbers for the audio In/Out, and networking components.

We also compile the parts lists that are used in the shipping process.

5. How does ISO accreditation improve things?

Consistency! ISO standards provide an accredited high level of consistency in the way each project is handled. A customer can be certain that each project is completed using the same processes and that those processes are carried out to the highest quality standards required to achieve accreditation. This in turn leads to greater quality, efficiency and helps ensure that nothing is missed.

6. How has testing changed in the last decade?

As a former desk tester for many years, one of the key changes has been a move toward network testing alongside the range of audio measurements we undertake.

High-quality audio circuits will always be a key part of Calrec's designs and are still checked and measured at numerous stages throughout the manufacturing process. In addition, we also have to ensure that whatever IP networks the audio is transported on are stable, scalable and resilient. As such, we have had to look at ways of measuring and guaranteeing that stability for audio networks.

Alongside the development of networked audio is the possibility for remote access to systems, which in turn enables us to carry out testing functions and configurations remotely. We can now allow engineers to log in to a system to help diagnose and solve any issues, giving our customers an extra level of support which was not available even 10 years ago.

The ability to download and upload scripts has also improved significantly since the old days of serial ports, while a fully networked test system also allows for more straightforward scalability than some of the pre-configured systems that we used to engineer.

We have also improved our testing software and developed a number of in-house visual-based applications that are easy to follow and quickly ascertain that any system is fully functional and error-free.

7. Why has Calrec built an acceptance area; what is it for?

Sometimes customers like to check that the configured system matches their original requirements, or they might want to perform a set of pre configurations and checks before the desk reaches its final destination. This can be useful if you are new to Calrec products and are not all that familiar with the equipment yet, or you could be an existing customer looking to expand a system and discuss the possibilities.

The acceptance a
LINK: https://calrec.com/blog/meet-your-maker-joe-gulaiczuk/...
See more stories from calrec

More from Calrec

26/11/2021

IBC 2021 Cancelled: Calrec's 7 Key Focuses

IBC 2021 Cancelled: Although we can't meet in person, we can still have a chat Get in touch for a catch-up, or book a remote demo with Calrec's broadca...

24/11/2021

IBC 2021: 7 magnificent reasons to speak to Calrec

Not travelling to IBC 2021? We can still have a chat. Get in touch, or book a remote demo with Calrec's broadcast specialists, to get up close and personal...

23/11/2021

7 magnificent reasons to speak to Calrec

Not travelling to IBC 2021? We can still have a chat. Get in touch, or book a remote demo with Calrec's broadcast specialists, to get up close and personal...

02/11/2021

Craft Interview: Zeynep Mengioglu, Sound Engineer

Turkey-based Zeynep Mengioglu is the first woman to work in an OB van in Turkey. Her years of growing up around professional audio have helped hone her craft as...

26/10/2021

Rise up and be counted

Rise up and be counted | Rise Mentoring Programme: What, Why & How By Alexia El Merhebi, Digital Communications and Events Executive...

26/10/2021

Sound Devices Joins Audiotonix Group

About Audiotonix Audiotonix is a global market leader in the design, engineering and manufacture of professional audio mixing consoles and ancillary products. ...

06/10/2021

Pepper FM in Greece Spices up Output with Type R

Contemporary radio station Pepper 96.6 FM in Athens, Greece is reaping the benefits of a Calrec Type R for Radio console to help deliver jazz, rock, funk and re...

04/10/2021

Meet your Maker: Tim Harbour, UI/UX Designer

Welcome to the eighth instalment of Meet Your Maker with Tim Harbour, Calrec's UI/UX Designer. So, what is GUI design, and why should we care? 1. What is G...

29/09/2021

Meet your Maker: Tim Harbour, GUI & Web Design

Welcome to the eighth instalment of Meet Your Maker with Tim Harbour, Calrec's UI/UX Designer. So, what is GUI design, and why should we care? 1. What is G...

27/09/2021

Eldos FM moves to AoIP with Calrec's Type R for Radio

Community radio broadcaster Eldos FM in Johannesburg, South Africa, is the latest broadcaster to take advantage of the benefits of IP with Calrec's Type R f...

10/09/2021

Vibez.Live tunes into Calrec's Type R for Radio

South African internet radio station Vibez.Live has moved into the digital realm with Calrec's Type R for Radio Vibez.Live, an internet broadcaster is taki...

10/09/2021

How All Elite Wrestling kept things moving during the pandemic

How All Elite Wrestling kept things moving during the pandemic By: Ryan Glick, FOH Engineer, All Elite Wrestling For the past two years, I've had the good...

03/09/2021

Read all about it! Calrec helps Talking Newspaper back to live recording

Read all about it! Calrec helps Talking Newspaper back to live recording After 15 months the Talking Newspaper for Todmorden (TNT) is back to live recording ...

30/07/2021

How Calrec ensured that broadcasters were always on

How Calrec ensured that broadcasters were always on By Sid Stanley, General Manager at Calrec Although 2020 was challenging in many ways, it proved how resi...

29/07/2021

On the road again

Steve Gligorovic is a Senior Customer Support Engineer at Calrec. He was the last Customer Support Engineer to return to Calrec prior to the outbreak of Covid ...

22/07/2021

Summa in the City

City TV-Radio Agency in St. Petersburg, Russia, has installed a Calrec Summa console in its first UHD OB truck....

13/07/2021

Calrec goes the extra mile for Overgate Hospice

Sixteen hardy hikers from Calrec are hoping to raise 10,000 for Overgate Hospice by completing the Yorkshire Three Peaks challenge in under 12 hours. On Satur...

23/06/2021

Calrec equips NBC Olympics with consoles and RP1 at Tokyo Olympics

Calrec equips NBC Olympics with consoles and RP1 during its coverage of the Tokyo Olympics NBC Olympics, a division of the NBC Sports Group, has selected Calre...

08/06/2021

Calrec offers remote commissioning and demonstration capabilities

Calrec expands remote commissioning and remote product demonstration capabilities Calrec has expanded its global remote commissioning, training and product dem...

24/05/2021

Mixing Dolby Atmos: What you need to know

Mixing Dolby Atmos: What you need to know Mixing Dolby Atmos allows you to put the viewers right in the action by precisely placing and moving sounds to delive...

12/05/2021

Dolby Atmos live broadcast mixing: What you need to know

Dolby Atmos live broadcast mixing: What you need to know Mixing live broadcasts with Dolby Atmos allows you to put the viewers right in the action by precisely...

24/03/2021

Dome Productions selects Calrec Apollo console for IP truck

Click the links below to read about our latest news stories....

11/03/2021

Valencian TV station Punt Media and COEL case study

Click the links below to read about our latest case studies....

25/02/2021

Calrec's Artemis audio console shines for BeckTV install

A large number of inputs and outputs are being shared across the client's facilities. They have a lot of signals that come in and out from this location; t...

04/02/2021

Drop Ship Audio expands its Calrec roster with an Artemis for TV network

He continued, As a company, owner reliability and support were at the forefront of the decision and we know that Calrec delivers on both fronts. Another big se...

04/02/2021

Lockdown Creation: Synthax content tips for success

Training & Feature Reviews We find that video makes compelling product overviews, says Bas. Manufacturer communication often has to be high-level, and becau...

22/12/2020

When to use the mix-minus bus

There are lots of things that make a broadcast desk, which is why Calrec squeezes in more broadcast features into its equipment than most. Features that make i...

21/12/2020

Craft Interview: Marine Martignac

As a France-based broadcast audio expert, Marine Martignac has multiple roles, exposing her to many and varied ways of working. She believes it's in the ind...

18/12/2020

How to create a phantom centre for monitor mixing

Here's how you can quickly create independent headphone monitoring to check centre imaging in a 5.1 environment that follows the Main Console Monitor, but u...

18/12/2020

Calrec's woolly fundraisers raise 500 for Overgate Hospice

Calrec has been a supporter of Overgate Hospice for many years. Overgate is a local independent charity that aims to improve the quality of life for adults in C...

17/12/2020

ImPulse AoIP processing and routing engine Q&A

How does it work in terms of IP upgrade path? Taking the IP upgrade path first, central to the design of ImPulse was the need to embrace open IP standards and ...

17/12/2020

Tall Audio: The Choir, lockdown and the audio challenges

There were two main elements to the show. The first was a documentary element. So, simultaneously, while we were working with Gareth, there were Producer Dire...

15/12/2020

Robert Edwards Q&A

Earlier this month we spoke with Bafta award-winning mixer Robert Edwards as part of the IABM s education programme and streamed exclusively for a network of un...

10/12/2020

Meet Your Maker: Gary Burns

Welcome to the seventh instalment of Meet Your Maker Q&A! Meet Your Maker is a series of behind-the-scenes videos and blogs that illustrate the wide range of in...

25/11/2020

IABM student event with Sound Supervisor Robert Edwards

This week we were delighted to be able to have a fireside chat with top UK sound guru Robert Edwards, who has 46 years of experience as one of the primary mixer...

23/11/2020

Jan Law receives highly commended recognition at Rise Awards

Jan Law, Calrec's Senior Product Technician has received highly commended recognition at the global Rise Awards 2020 virtual ceremony. Jan was one of only ...

20/11/2020

Calrec Type R Real-Time Demo with Japanese Partner Hibino

Have you ever wanted to control an audio mixing console in Tokyo from the comfort of your own home? Thanks to our Japanese partner, Hibino, now you can! Our J...

19/11/2020

Calrec launches its certified online Audio over IP training course

Calrec's successful Sound Institute increases scope with the launch of its certified online Audio over IP Training Course Calrec has expanded the scope of ...

09/11/2020

Mobile TV Group launches 47 FLEX

Denver-based live production giant Mobile TV Group (MTVG) has expanded its fleet with the launch of 47 FLEX, which is the third FLEX' mobile unit within it...

21/10/2020

Craft Interview: Chris Eckford

As a UK-based A1 for the past decade, Chris Eckford has worked on some high-profile projects including the Premier League and the Amazon Prime Sport Premier Lea...

13/10/2020

JTV installs Brio for radio programming

Jeonju Television (JTV), a regional TV and radio broadcasting company in Jeonju, South Korea, has installed a Calrec Brio36 and Brio12 digital audio console for...

16/09/2020

Meet Your Maker: Joe Gulaiczuk

Welcome to the sixth instalment of Meet Your Maker Q&A! Meet Your Maker is a series of behind-the-scenes videos and blogs that illustrate the wide range of in-h...

31/08/2020

The Sounds of the NHL in the Bubble

Thank you to Chuck Ibey, A1 & Sound Guarantor from Dome Productions in Canada for sharing this insightful blog on what it's like to work in the NHL Bubble. ...

31/08/2020

Calrec launches Calrec Sound Institute

Calrec has launched the Calrec Sound Institute, a series of online certification training courses, starting with courses for two of its most widely used digital...

15/08/2020

Meet Your Maker: Andrew Munt

Welcome to the fourth instalment of Meet Your Maker Q&A! Meet Your Maker is a series of behind-the-scenes videos and blogs that illustrate the wide range of in-...

15/08/2020

Meet Your Maker: Maria Mitchell

Welcome to the fifth instalment of Meet Your Maker Q&A! Meet Your Maker is a series of behind-the-scenes videos and blogs that illustrate the wide range of in-h...

04/08/2020

Craft Interview: Patrick Castonguay

As an accomplished A1 for almost 20 years now, Canada-based Patrick Castonguay loves the challenge of being creative with every live mix he produces. He's w...

29/07/2020

Craft Interview: John Hunter

A freelance audio engineer (A1) for Dome Productions in Canada, John Hunter first discovered his passion for audio with live music. Eventually, his path led hi...

04/07/2020

Meet Your Maker: Sally Baines

Welcome to the third instalment of Meet Your Maker Q&A! Meet Your Maker is a series of behind-the-scenes videos and blogs that illustrate the wide range of in-h...

02/07/2020

In conversation with NEP, Grass Valley and Net Insight

What happens next with live broadcasting? We got together with Donald Begg from NEP UK, Boromy Ung from Grass Valley, Per Lindgren from Net Insight, Riikka Kop...