Broaman Extends Routing Matrix for Rench Parliament

(05/03/2014) La Cha ne parlementaire (The parliamentary channel) is a French television network responsible for broadcasting activity from the National Assembly of France (LCP) and the Senate of France (Public S nat) made available through TNT digital terrestrial television.

Created in 1999 at the request of the National Assembly of France to broadcast initially twice a week on France 3, by the following year it had also encompassed the Senate of France. Today it broadcasts 24 hours from the Assembly followed by 24 hours from the Senate having obtained its own TNT frequency. This makes high demands on the transmission facilities.

Last year, production needed to improve the bi-directional communication infrastructure, and Philippe Del pine, sales engineer at Audiopole, undertook a site survey before providing a solution based around BroaMan/Optocore network components.

They had some remote channels and wanted connectivity between the cameras and the main control room over distance, he said. We started discussing with them about fibre and how to carry the video signal around the four parliamentary columns that dominate the room [the main room is called La Salle des Quatre Colonnes]. However, little did he realise that this first phased would develop into a much bigger project.

Initially, we proposed a multiplex solution down a single fibre using two V3R-FX-INTERCOM-SDI the BroaMan video platform with audio [later to become known as MUX22], he said. This would function as a 5-in, 1-out point-to-point system.

This would give production five separate video signals for when ministers are interviewed on site. Via the BroaMan devices all the video signals could be multiplexed onto a single Optocore fibre, with the programme sending back signals from the control room to the Salle des Quatre Colonnes.

copyrighted by liveProduction.tv The ports in and out of the BroaMan devices carry the main audio programme and also the intercom both ways for a connection with a wireless Clear-Com Tempest system over several hundred meters, continues Del pine Previously they were only able to carry one signal and no audio.

With simplicity of set up and effective functionality, the customer found this to be the perfect solution for carrying video, audio and intercom, summarised M. Del pine.

But already a second phase was being considered as the Assembly saw the potential of extending the system further to other locations and creating a centralised routing system by redeploying old devices with further interfaces from BroaMan.

copyrighted by liveProduction.tv Explained BroaMan application engineer, Maciek Janiszewski, At the second stage we delivered a Route66 as the centralised router and two initial MUX22 units [a third will be supplied later].

Route66 is configured to combine five satellites integrating the older V3R-FX-INTERCOM-SDI units with the new MUX22 devices. Every channel that appears on the satellite is available in Route66 and can be routed to any of the outputs.

As we offer non-blocking video and audio matrix, one input can be routed to multiple outputs.

copyrighted by liveProduction.tv Both the V3R-FX-INTERCOM-SDI and MUX22 devices are equipped with the Clear-Com board, offering four 4-wire intercom ports each, while a X6R-FX-INTERCOM provides local audio and intercom I/O in the central location, where the ports are used either for Clear-Com intercom or line level audio.

Summing up, Janiszewski says, The Optocore matrix now offers La Cha ne Parlementaire complete freedom when routing audio channels.

The new system is controlled by the latest Optocore software, which introduces advanced monitoring features and video matrixing, and will be supported by Audiopole.

The system integration was carried out by Paris-based AV specialists, CVS.

About BroaMan

BroaMan (Broadcast Manufactur GmbH) products are aimed at broadcasters as well as production companies, sport facilities, professional AV integrators and many more applications. The company offers customised solutions for every application that requires SD/HD/3G video transport or routing whether a big and complex system for broadcast studio or OB Van, or a simple point to point for a small church, conference hall, etc. With DiViNe (Digital Video Network) all open standards can be integrated digital video, audio and data on the same fibre infrastructure. The main differentiator from other companies providing video over fibre solutions is the approach. Each video system is unique and every customer requires a different level of complexity and features. Each BroaMan system is tailored to match the customers exact needs. Using the DiViNe system the customer, together with BroaMan's Application Engineering team, can specify the general system performance, the interface layout based on basic frames and some special features. As a result each customer receives his own bespoke system, which perfectly matches his application.

LINK:	http://www.live-production.tv/news/products/broaman-extends-routing-ma...
	See more stories from liveproduction

Most recent headlines