Sony Pixel Power calrec Sony

The IEC s next generation shines bright

05/01/2015

The IEC's next generation shines bright Overview of the IEC Young Professionals 2014 workshop Janice Blondeau

A record number of participants attended the fifth IEC Young Professionals workshop held in November 2014, in conjunction with the 78th IEC General Meeting.

Tokyp YP workshop round-up Sixty-seven IEC YPs (Young Professionals) from 33 countries took part in this year's event in Tokyo. The IEC Young Professionals programme was developed to enable the IEC and its National Committees to reach out to the younger generation of experts, managers and leaders, encouraging their long-term participation in standardization and conformity assessment activities. This in turn helps guarantee continuity of high quality leaders and experts.

Before the workshop Prior to Tokyo, the participants, who were selected by their NCs (National Committees), completed an online training to be better prepared for the workshop. They also completed their individual profiles via the IEC Expert Management System and these were made available to the IEC community on the IEC website.

The group participating in this year's workshop was enthusiastic and their interest and inspiration grew as the workshop unfolded. They heard in detail about the IEC and its standardization and conformity assessment work, discovering how the IEC approaches emerging trends and technologies and the importance of having balanced representation in the NC structure. In one session several former YPs shared their success stories on how they've increased their involvement in IEC work and advising this year's Young Professionals on how to do so.

Participants in the Young Professionals 2014 workshop in Tokyo, Japan

Insights into IEC management At the workshop the Young Professionals had the choice to observe either the SMB (Standardization Management Board) or the CAB (Conformity Assessment Board) meeting. The day after these meetings, special sessions with officers of the SMB and CAB were organized to explain what the YPs had seen and to answer questions. Observing part of a technical meeting also gave workshop participants a taste of the IEC in action, while numerous breakout and interactive sessions provided participants the opportunity to share their thoughts and views.

Meeting with TC Chairs and Secretaries IEC TC (Technical Committees) Chairmen/Secretaries and the Young Professionals met over a special breakfast, appreciated by both the YPs and the participating TCs. Another breakfast was held with NC representatives, to help build closer ties between the NC and their YPs.

Four elected YP Leaders from earlier years were also part of the workshop, leading various sessions. Many occasions were provided for questions and this was taken advantage of by numerous participants. They also received extensive networking opportunities both among themselves as well as with the wider IEC community and had the opportunity to go on an industry visit to one of the following companies: Sony, NTT, Sumitomo Electric Industrial and Fuji Electric.

Feedback and recommendations Feedback from the IEC Young Professionals 2014 workshop has been positive. All participants indicated that they found the event valuable - 99% of YPs had their expectations fulfilled and 97% plan to become more involved in IEC work. Examples of the benefits that YPs have mentioned include outstanding international networking opportunities, being able to meet and interact with IEC management and NC Officers, and enhanced understanding of IEC procedures and processes.

The 2014 Young Professionals made several recommendations to increase the success of this programme. The first recommendation is for National Committees to establish IEC national YP programmes. It was emphasized that national programmes which focus on the electrotechnical sector offer the greatest benefits to participants, particularly in terms of networking opportunities. The YPs also strongly suggested that their NCs should use them as ambassadors and involve them in national activities that they organize. Mentoring was also identified as a crucial component to help the YPs become more involved.

In their own words I'm really grateful to be able to participate in the year's IEC Young Professionals workshop. What I found extremely valuable were the many opportunities to network with IEC experts as well as other Young Professionals. I found many like-minded friends also working in the power industry, like me.

Zijuan Lian, Singapore

My advice for up-and-coming Young Professionals who want to know more about the IEC and who want to get involved in its activities is come, attend with an open mind. Expect an intense time at the IEC Young Professional workshop - but a very, very worthwhile time.

Neil Moran, UK

2014 Young Professional Leaders The three 2014 YP Leaders elected by workshop participants are Craig Carlson (South Africa), Thahirah Jalal (New Zealand) and Leo Ohtsuka (Japan). They will be working closely with the YPs and the IEC Central Office to develop the programme further.

We wish the 2014 Young Professionals a long and fruitful association with the IEC and its standardization and conformity assessment work.
LINK: http://www.iec.ch/etech/2014/etech_1214/spec-10.htm...
See more stories from iec

More from IEC

13/03/2024

IEC welcomes KATS as first funding partner for Global Impact Fund

IEC's Global Impact Fund (IEC-GIF) took a step further in advancing the vision of a safer, more efficient world today with the signing of its first funding ...

12/03/2024

IEC appoints James Wood as Director of Communications

Geneva, Switzerland, 12 March, 2024 - The IEC today announced the appointment of strategic communications and advocacy professional James Wood as its new Direct...

05/02/2024

Transforming old batteries into new resources to improve lives in Africa

IEC's vision to create a safer, more efficient world gained further momentum recently with the launch of a new project supported by the IEC Global Impact Fu...

11/01/2024

IEC and ISO launch new joint technical committee on quantum technologies

Geneva, 11 January 2024 - The IEC and the International Organization for Standardization (ISO) today announced the establishment of a joint technical committee ...

24/10/2023

Greenwashing: industry now able to provide independent proof for environmental claims

With accusations of greenwashing increasing, industry urgently needed independen...

23/10/2023

IEC announces Edison Award winners

The IEC has presented its Thomas A. Edison Award to five individuals who have made outstanding contributions to the IEC. Created in 2010, the Award recognizes e...

28/06/2023

Transforming old batteries into new resources in Africa

IEC's vision to create a safer, more efficient world gained further momentum recently with the launch of the first project of the IEC Global Impact Fund. ...

31/05/2023

An abundance of marine energy: soon to become a reality

Geneva, Switzerland/Glasgow, UK, 31 May 2023 - Over 70% of the earth's surface is covered by oceans, which offer one of the largest untapped sources of ener...

28/10/2022

Industry leaders and technology experts in San Francisco for IEC General Meeting

San Francisco, 28th October 2022 - Business and industry leaders from around the world are joining technology experts in San Francisco for the 86th annual IEC G...

28/10/2022

Industry leaders and technology experts descend on San Francisco for annual IEC General Meeting

San Francisco, 28th October 2022 - Business and industry leaders from around the...

20/10/2022

G20: Recover together, recover stronger with international standards

Bali, Indonesia, 20th October 2022 - The leading international standards bodies - IEC, ISO and ITU - have urged world leaders to recognize, support, and adopt i...

03/11/2021

IEC, ISO and ITU ready to join proposed UN expert group to mitigate climate change

Geneva, 2 November 2021-The world's leading developers of International Stan...

28/10/2021

G20: Creating a better future with international standards

Milan, Italy, 28/10/2021 The world's leading standards bodies - IEC, ISO and ITU - have issued a joint declaration ahead of the G20 summit in Rome. They cal...

07/10/2021

2021 Lord Kelvin Award

Geneva, Switzerland, 2021-10-07 - The IEC has awarded the 2021 Lord Kelvin Award to Mr Tony Capel from Canada for his dedicated contributions and participation ...

05/10/2021

IEC recognizes four experts with its Thomas Edison Award

The IEC has presented its Thomas Edison Award to four individuals who have made outstanding contributions to the IEC. Created in 2010, the Thomas Edison Award r...

03/10/2021

IEC General Meeting officially opens in Dubai

Dubai, United Arab Emirates, 2021-10-01 - Nearly 600 participants representing 172 countries will attend the IEC General Meeting taking place in Dubai. Against ...

08/07/2021

An interchangeable charging solution for all consumer electronic devices is here

After the successful introduction of a common charging solution for mobile smartphones (based on USB technologies), in 2011, the IEC published a common charging...

27/01/2021

ISO and IEC experts win prestigious Emmy award

Geneva, Switzerland, 2021-01-26 - The joint technical committee of IEC and ISO (ISO/IEC JTC 1) has been awarded a Technology & Engineering Emmy . The US-based N...

03/12/2020

Celebrating World Standards Day 2020

The IEC, ISO and ITU announce the winners of the annual World Standards Day contest. This year, a poster contest was launched, along the theme of Protecting the...

03/12/2020

G20: call to action on international standards

Organizers of the Riyadh International Standards Summit held on 4 November 2020 have issued a call to action for the recognition, support and adoption of intern...

03/12/2020

IEC launches its first virtual General Meeting

Over 400 participants representing 84 countries are attending the first virtual IEC General Meeting. It consists of 15 sessions taking place between 9 and 20 No...

03/12/2020

IEC presents its Thomas Edison Award recipients

The IEC has presented its Thomas Edison Award to four individuals who have made outstanding contributions to the IEC. Created in 2010, the Thomas Edison Award r...

03/12/2020

IEC publishes a white paper on the future of safety

The Internet of Things, big data, advanced robotics and artificial intelligence are transforming the connection between technology and people. New and complex s...

03/12/2020

2020 Lord Kelvin Award

Geneva, Switzerland, 2020-11-13 - The IEC has awarded the 2020 Lord Kelvin Award to Mr. Toshiyuki Kajiya from Japan for his outstanding contribution to the deve...

27/10/2018

IEC awards highest honour in electrotechnology to Wim De Kesel

IEC awards highest honour in electrotechnology to Wim De Kesel 2018 Lord Kelvin Award recognizes Mr De Kesel's leadership in standardization in the areas of...

18/10/2018

IEC-IEEE-KATS Challenge awards first place prize to paper addressing standardization in a smart era

IEC-IEEE-KATS Challenge awards first place prize to paper addressing standardiza...

10/10/2018

Getting the packaging right - International Guide just updated

Getting the packaging right International Guide just updated Geneva, Switzerland, 2018-10-03 - Packaging has come a very long way since its humble beginnin...

27/07/2018

Addressing ethics in autonomous and intelligent systems: IEC launches an open community jointly with eight other founding organizations

Addressing ethics in autonomous and intelligent systems: IEC launches an open co...

26/07/2018

Newly improved guidelines for testing machine-readable passports just out

Newly improved guidelines for testing machine-readable passports just out Machine readable passports enable faster more accurate processing Geneva, Switzer...

16/07/2018

Reducing the risks of information security breaches with ISO/IEC 27005

Reducing the risks of information security breaches with ISO/IEC 27005 New legislation puts organizations under even greater pressure to ensure their informatio...

30/05/2018

Future-proofing pre-payment meters

Future-proofing pre-payment meters Key International Standard to enhance security and functionality of metering pre-payment systems Geneva, Switzerland, 20...

30/05/2018

IECRE issues first solar PV certificate

IECRE issues first solar PV certificate IEC TS 62941 certificate identifies best practices for design, manufacturing and materials Geneva, Switzerland, 201...

08/02/2018

Jo Cops elected new Treasurer of IEC

Jo Cops elected new Treasurer of IEC Transparency and improving decision-making data to be main focus Geneva, Switzerland, 2018-01-01 - Belgian Jo Cops too...

29/01/2018

IEC TS 63033 Drive Monitoring System enables drivers to see all around their vehicles

IEC TS 63033 Drive Monitoring System enables drivers to see all around their veh...

01/12/2017

New edition of ISO/IEC 17025 just published

New edition of ISO/IEC 17025 just published The go-to international reference for calibration and testing laboratories worldwide Geneva, Switzerland, 1 Decem...

27/11/2017

International Standard looks to curb theft of personal data

International Standard looks to curb theft of personal data Uber is making headlines for its reaction to the theft of the personal data of 57 million drivers ...

24/11/2017

Keeping people at the centre of smart city initiatives

Keeping people at the centre of smart city initiatives Developing smart city solutions that are citizen-centric and offer real value will be key to future suc...

26/10/2017

IEC, ISO and ITU receive Primetime Emmy award for excellence in video engineering

IEC, ISO and ITU receive Primetime Emmy award for excellence in video engineerin...

23/02/2016

Common terminology for information security management just revised

Common terminology for information security management just revised Geneva, Switzerland, 2016-02-23 - All information held and processed by an organization...

09/02/2016

New global platform to help cities become sustainable and smart

New global platform to help cities become sustainable and smart Geneva, Switzerland, 2016-01-15 - While we often hear about smart, sustainable cities, addi...

03/12/2015

Security toolbox protects organizations from cyber-attacks

Security toolbox protects organizations from cyber-attacks Geneva, Switzerland, 2015-12-17 - Cyber-attacks are among the greatest risks an organization can ...

27/04/2015

Is your workplace safe?

Is your workplace safe? Geneva, Switzerland, 2015-04-27 - When people go to work, they usually expect to carry out their activities in a healthy and safe e...

09/04/2015

When everyday symbols become art

When everyday symbols become art The IEC power symbol at MoMA Janice Blondeau It's not every day that the work of the IEC enters the realms of visual art...

07/04/2015

Have you ever been shocked?

Have you ever been shocked? Some simple rules and useful tools that protect against electric shock Claire Marchand Who among you hasn't at least once in...

19/03/2015

Powering the planet with water

Powering the planet with water The special link between water and energy Geneva, Switzerland, 2015-03-19 - On 22 March, World Water Day will be celebrated wi...

03/03/2015

Digital meets the visible world

The future of 3D printing Digital meets the visible world Gabriela Ehrlich e-tech attended a presentation by Carl Bass, CEO of Autodesk during CES. Carl Bass...

02/03/2015

Wearing it well

The great potential of wearables Wearing it well Antoinette Price Do you monitor yourself closely? Heart rate, carb intake, sleeping patterns? Do you track y...

26/02/2015

Getting Smart about Energy

IEC Systems Committee Smart Energy Systems Committee on Smart Energy to extend the scope of strategic or other horizontal groups to bridge areas covered by mor...

24/02/2015

Tech trends 05

Tech trends 2015 Insights from author of Digital Destiny Shawn DuBravac Gabriela Ehrlich The 2015 CES was again a show of records, reflecting the growing im...

23/02/2015

Leading from the front

Leading from the front Introducing 2014 IEC Young Professional Leaders Janice Blondeau During the IEC Young Professionals workshop in Tokyo in November 2014,...