The Studio One Drumcoder
31/10/2020
This tip is for advanced users and requires a fairly complex setup. Rather than go into too much detail about how it works, simply download the Drumcoder.song file, which has a complete drumcoding setup. Load Drumcoder.song into Studio One 5, press play, and you'll hear what drumcoding is all about. (Note that the file format isn't compatible with previous Studio One versions. However, based on the description in this tip, you should be able to roll your own drumcoding setup in previous Studio One versions.)
Let's check out an audio demo. The first half has the drumcoded sound only, while the second half mixes in the drum (modulator) sound.
chadschoonmaker Drumcoder Demo
But wait-there's more! Although the drumcoder isn't designed to be the greatest vocoder in the world (and it isn't), you can still get some decent results. Here, the voice is saying Even do some kinds of vocal effects with the PreSonus drumcoder-have fun!'
chadschoonmaker Drumcoder Vocal Demo
Next, we'll explore how it works or if you're impatient, just reverse-engineer the song.
Drumcoding Explained Vocoding splits the modulator (like voice or drums) into multiple frequency bands. In a traditional vocoder, each band produces a control voltage that corresponds to the audio's level in each band. Similarly, the carrier splits into the same frequency bands. A VCA follows each carrier band, and the VCAs are fed by the modulator's control voltages. So, if there's midrange energy in the modulator, it opens the VCA for the carrier's midrange audio. If there's bass energy in the modulator, it opens the VCA for the carrier's bass audio. With a vocoder, as different energy occurs in different bands that cover a vocal's frequency range, the carrier mimics that same distribution of energy in its own bands. This is what generates talking instrument effects.
Studio One's Implementation Vocoders typically need at least eight frequency bands to make voices sound intelligible. Studio One's Splitter can divide incoming audio into five bands, which is enough resolution for drumcoding. Fig. 1 (which takes some graphic liberties with Studio One's UI), shows the signal flow.
Figure 1: Drumcoder signal flow.
The Drums track provides the modulator signal, and the Mai Tai synthesizer provides the carrier. The Drums track has five pre-fader sends to distribute the drum sound to five buses. As shown in Fig. 2, each of the five buses has a Splitter (but no other effects) set to Frequency Split mode, with splits at 200, 400, 800, and 1600 Hz. The < 200 Hz bus mutes all Splits except for 1, the 200-400 bus mutes all Splits except for 2, the 400-800 bus mutes all splits except for 3, the 800 - 1.6 kHz mutes all splits except for 4, and the > 1.6 kHz bus mutes all splits except for 5. Now each bus output covers one of the five bands.
Figure 2: Splitter settings for the five buses.
The Mai Tai carrier has a splitter set to the same frequencies. Each split goes to an Expander, which basically acts like a VCA; see Fig. 3. We don't need to break out the Splitter outputs, because you can access the sidechain for the Expanders located within the Splitter. (A Mixtool follows each Expander, but it's there solely to provide a volume control for each of the carrier's bands in the control panel.)
Figure 3: Effects used for the Mai Tai synthesizer carrier track.
As to the bus outputs, the < 200 Hz bus has a send that goes to the sidechain of the Expander in the carrier's < 200 Hz split. The 200-400 Hz bus has a send to the sidechain of the Expander in the carrier's 200-400 Hz split. The 400-800 Hz bus has a send to the sidechain of the Expander in the carrier's 400-800 Hz split you get the idea. Basically, each bus provides a control voltage for the corresponding VCA (Expander) that controls the level of the carrier's five bands.
Fig. 4 shows the Control panel.
Figure 4: Drumcoder macro controls.
Threshold, Ratio, and Range cover the full range of Expander controls. They affect how tightly the Expander follows the modulator, which controls the effect's percussive nature. Just play around with them until you get the sound you want. The Expander Envelope settings aren't particularly crucial, but I find 0.10 ms Attack and 128.0 ms Release work well. Of course, you also need to enable the sidechain for each Expander, and make sure it's listening to the bus that corresponds to the correct band.
The five knobs toward the right control the level of the individual bands by altering the Gain of the Mixtool that follows each band's Expander. The five associated buttons enable or bypass the Expander for a particular band, which can give some really cool effects. For example, turn off the Expander on the Mid band, and with the Song's Mai Tai preset, it almost sounds like a choir is singing along with the drumcoded drums.
Vocal Effects Although the Drumcoder isn't really designed for vocal effects, it still can be fun. The key is to bring up the > 1.6 kHz Bus slider, as this mixes in some of the voice's s sounds, which give intelligibility. Experiment with the Expander controls to find what works well. If you really want to dig into vocal applications, edit the Splitter frequencies to optimize them for the vocal range instead of drums o
LINK: | https://blog.presonus.com/index.php/2020/10/30/studio-one-drumcoder/... |
See more stories from presonus |
More from PreSonus
19/04/2024
Impact XT's Secret Clip-Launching Talents
By Craig Anderton Impact XT can launch clips, which is great for songwriting (see the blog post Songwriting with Impact XT). But few people realize that Impact...
12/04/2024
Make Better Mixes with Selective EQ
By Craig Anderton Good mixes often depend on carving out a unique sonic space for each instrument, so you can hear them clearly. Sometimes carving out that spa...
05/04/2024
Multitimbral Magic with MIDI Guitar
By Craig Anderton MIDI guitars are a niche product, because the learning curve can be daunting for some guitar players. However, I'm surprised how many pro...
29/03/2024
Avoid Collaboration Concerns
By Craig Anderton As the universe of Studio One users grows, so do opportunities for collaboration. But your collaborator may not be using the same version of ...
22/03/2024
Create Rhythmic Alchemy with the BeatCoder
By Craig Anderton Over three years ago, I wrote a blog post on how to make a drumcoder. Its design was somewhat like a vocoder-drum audio served as a modulat...
15/03/2024
Make Stereo Downmixes More Immersive
By Craig Anderton One of Atmos's coolest features is scalability. No matter how complex your Atmos project may be, you can render it as Binaural, 5.1, 5.1....
13/03/2024
Studio One: A Brief Exploration with Great Good Fine Okay
Watch the Brooklyn Synthpop duo remix their song Blame in Studio One Less than 24 hours after meeting each other, producer Luke Moellman and vocalist Jon San...
10/03/2024
Stamp Out Boring Flanging!
By Craig Anderton The impetus behind this design was wanting to add envelope flanging to amp sims like Ampire. But there's a problem: most amp sim outputs ...
01/03/2024
Creating Room Ambiance with Virtual Mics
By Craig Anderton Supplementing close-miking techniques with room mics gives acoustic sounds a life-like sense of space. Typically, this technique involves pla...
27/02/2024
Notion Mobile 3.3 Now Available
Notion Mobile v3 took mobile music creation to the next level with support for iOS, Android, Windows, Fire OS and macOS. Now v3.3 adds many enhancements and fix...
26/02/2024
The Sweet Spot with Grammy-Nominated Producer 6ix
Logic's Grammy-nominated producer breaks down his Sweet Spot. Before he found success as an avant-garde hip hop producer, 6ix was just 30 units shy of a de...
25/02/2024
The Sweet Spot with Multi-Platinum Producer Warren Huart
The Grammy-nominated multi-Platinum producer breaks down his Sweet Spot. From the studio with chart-topping artists like Aerosmith and The Fray, to empowering ...
23/02/2024
Don't Make This Mixing Mistake!
By Craig Anderton Do you think of mixes in absolute terms, or relative terms? Knowing the difference, and when to apply which approach, can make a huge differe...
16/02/2024
Tuff Beats
By Craig Anderton Calling all beats/hip-hop/EDM/hard rock fans: This novel effects starts with drums modulating the Vocoder's white noise carrier, and take...
09/02/2024
Reinvent Your Stereo Panning
This tip is about working with stereo, NOT about Dolby Atmos or surround-but we're going to steal some of what Atmos does to reinvent stereo panning. Stud...
07/02/2024
Studio One: Mix in a New Dimension with Jeff Ellis
The GRAMMY-winning recording and mix engineer shows us how he uses Studio One to create an artful immersive mix. Jeff Ellis is a force to be reckoned with. The...
02/02/2024
Presence Electric 12-String (the Artist Version Remix)
Presence's sound library includes a fine acoustic 12-string guitar, but not an electric one. So, perhaps it's not surprising that one of the more popula...
26/01/2024
Faster, Simpler, and Better Comping
At first, this might not seem too exciting. But follow the directions below, and try comping using this method-I don't think you'll be disappointed. Thi...
19/01/2024
How to Quickly Slash Your Latency
You know the feeling: You're tracking or doing an overdub with a virtual instrument or amp sim, but you're frustrated by the excessive latency inherent ...
12/01/2024
How to Fix Phase Issues
Recording audio using more than one feed from the same source may create phase issues. For example, when miking a bass amp and taking a DI (dry) input, the DI...
05/01/2024
Bigger, Wider Sounds: Try Stereo Miking
If you haven't experimented yet with mid-side stereo miking, you'll be in for a treat when you do. Here's why: Record background singers with gorge...
29/12/2023
How to Prioritize Vocals with Mix Ducking
This complements the tip Better Ducking for Voiceovers and Podcasts and the tip Why I Don't Use Compression Anymore. It applies the concept of voiceover duc...
22/12/2023
Should You Use Highpass Filters when Mixing?
Engineers sometimes advocate using high-pass filters to clean up the low end and tighten the sound. Others believe that because of issues inherent in highpass...
20/12/2023
Studio One: A Brief Exploration with Josh Cumbee
The GRAMMY-nominated artist, producer, and songwriter shows us how he uses Studio One to cook a musical idea from scratch. Josh Cumbee is a triple threat: The ...
15/12/2023
Why I Don't Use Compressors Anymore
This wasn't a conscious decision, or something I planned. But when I looked through my last few songs while seeking candidates for a book's screenshots,...
08/12/2023
Phrasing-The Final Correction Frontier
First, a follow-up: In the October 13 tip about creating Track Presets for parallel processing, I mentioned that Track Presets can't include buses, which is...
01/12/2023
Vocoder Tweaks and Tricks
Vocoder's aren't normal effects. For example, Arturia's Vocoder V is an effect/instrument hybrid, because it's an audio effect that includes a...
24/11/2023
Release Your Music in Stereo and Immersive
For over a decade, stereo and mono vinyl records co-existed before the transition to stereo was complete. During that time, many records were released in both m...
17/11/2023
String Arrangements Made Simple
Strings can enhance almost any genre of music-and with a little more effort, you can do string arrangements that go beyond simply adding a string pad preset. So...
10/11/2023
The Metal Amp De-Harsher
Since Dynamic EQ was introduced in version 5, I've used it to replace and improve some techniques I used to do with static EQ. For example, I'm a fan of...
03/11/2023
Capture-and Keep-Your Creative Impulses
Gregor Beyerle recently posted a video called Producer vs. Engineer-What's the Difference?, which had quite a few comments. It seems most people feel that f...
27/10/2023
Better Drum Reverb with Dynamic EQ
Sending too many low frequencies through reverb gives a bloated, muddy sound. This is one reason why you'll rarely see a send from a bass track going into r...
20/10/2023
A Happy Accident for Drum Sounds
While trying to do something else with Melodyne, I stumbled on this way to add depth or tightness to drum sounds-quickly and easily. Here's the sound of an ...
13/10/2023
Create Track Presets for Parallel Processing
Parallel processing splits a signal into two or more parallel channels. Bi-amping is a common example of parallel processing: One channel processes low frequen...
06/10/2023
Easy Atmos: Grab Headphones, Mix, Have Fun!
Everyone talks about the importance of Dolby Atmos for post-production, but the implications go further than that. Atmos really does change how you create and ...
29/09/2023
You Can Do Immersive Audio. Right Now.
You don't need a massive surround system with speakers wired all over your studio to create immersive audio. Whether you want surround or Dolby Atmos mixes...
22/09/2023
Better Ducking for Voiceovers & Podcasts
By Craig Anderton Background music or environmental sounds are usually an essential part of commercials, movies, presentations, podcasts, and more. When doing ...
15/09/2023
Steal Your Intro-with Ripple Editing
The post Mixing la Studio One had a great response, so here's another tip that relates more to making better music than making better-sounding music. We...
08/09/2023
Quick EQ Fixes with Dynamic Tilt EQ
This FX Chain's inspiration is the Tilt filter circuit created by Tonelux designer Paul Wolff. First used in the Tonelux MP1A mic preamp, the Tilt filter h...
01/09/2023
Create Authentic, Customizable EDM Pumping with X-Trem
But first, some breaking news: Version 1.5 of The Huge Book of Studio One Tips and Tricks is now available from the PreSonus shop. Like previous versions, it...
25/08/2023
Superspeed Comping with Studio One 6.2
Studio One 6.2 reworked Layer and Take handling, and some of the new functionality is exceptionally useful. For example, suppose you want to record comp vocals ...
18/08/2023
The PhaseTone Warper
We haven't done a boutique digital effect for Studio One Professional in a while, so let's use a plugin in a totally wrong way-yet end up with somethi...
11/08/2023
Improve MIDI Drum Loop Flow
MIDI drum loops have a bad rap, because some musicians consider them metronomic and boring. But they don't have to be. Subtly leading or lagging the beat at...
04/08/2023
Mixing la Studio One
Ask 100 recording engineers about their approach to mixing, and you'll hear 100 different answers. Here's mine, and how this approach relates to Studio ...
28/07/2023
FL Studio Meets Studio One
FL Studio is a cool program. Yet when some users see me working with Studio One's features like comping tools, harmonic editing, the lyrics track, Mix FX, M...
21/07/2023
Make Bass Pop in Your Mix
Bass has a tough gig. Speakers have a hard time reproducing such low frequencies. Also, the ear is less sensitive to low (and high) frequencies compared to midr...
18/07/2023
Notion Mobile 3.2 Now Available
Notion Mobile v3 took mobile music creation to the next level with support for iOS, Android, Windows and macOS. Now v3.2 adds many enhancements and fixes, as we...
14/07/2023
Enhance Your Reverb's Image
First, an announcement: If you own the eBook How to Record and Mix Great Vocals in Studio One, you can download the 2.1 update for free from your PreSonus acc...
07/07/2023
Free! Three Primo Piano Presets
Let's transform your acoustic piano instrument sounds-with effects that showcase the power of Multiband Dynamics. Choose from two download links at the end ...
24/06/2023
Fix Boring Acoustic Drum Loops
Acoustic drum loops freeze-dry a drummer's playing-so, what you hear is what you get. What you get. What you get. What you get. What you get. What you get. ...